SOUS VIDE CLIFTON FL4CA

CATEGORY: SOUS VIDE

SOUS VIDE CLIFTON FL4CA

For consistent controlled cooking, Clifton water baths allow chefs to cook in a
precise temperature controlled environment, to produce consistently perfect
results. Ideal for sous vide and other low temperature cooking, these baths are
an indispensable piece of equipment for all leading chefs worldwide.
Versatility
This Clifton Food Range® immersion circulator is a space saving clip on heater/stirrer unit.
The design has been finalised with the input from several professional chefs.
For chefs who travel and want portability or have limited space in the kitchen this high quality
immersion circulator can be fitted in seconds to a standard stainless or polycarbonate gastronorm
tank or round, straight sided circular pot with a diameter of 30cms or more (minimum depth 15cms)
and maximum volume of approximately 56 litres. This covers most common stock pot sizes.
When not in use, the immersion circulator can be easily stored away taking up little space.
Precise temperatures
Using the same high precision controller found on all other Clifton Food Range® products, accuracy
and repeatability are guaranteed. Actual temperature is clearly displayed to 0.1°C.
If required, the integrated timer can be set between 1 minute and 99 hours. There is audio/visual
notification at the end of the set period after which the circulator still continues to operate at the set
temperature.
Current time and temperature settings are retained in memory even after ‘power off.’
Temperature
Display/resolution: Digital LED/0.1°C
Temp. range: Ambient + 5°C - 95°C
Temp. setting: Push button
Stability: ± 0.05°C
Timer
Display/resolution: Digital LED/1 minute increments
Duration: 1 minute - 99 hours
Cycle end: Audio/visual alert
General
Dimensions (mm) Stirrer case ~ 122w x 153d x 200h (includes handle)
Guard ~ 122w x 132d x 148h
Allow 90mm at rear of unit for mains cable/ventilation
Electrical supply: 230v
Power consumption: 1.25kW
Safety: Visual ‘FILL’ message on low water level
Vapour barrier protection
Product shown on accessory MSP0014 gastronorm tank
High quality build and features
Temperatures can be easily and rapidly set with the push button, wipe clean control panel.
The entire case is constructed from high quality stainless steel. The heater and stirrer mechanism
are completely surrounded by a stainless steel cage which prevents pouches coming into contact
with them.
The stirring propeller is manufactured from stainless steel and therefore virtually unbreakable.
The cage can be quickly removed to assist cleaning.
If the water drops below the recommended minimum level or the unit is inadvertently switched
on without being immersed in water, ‘FILL’ appears on the display as a visual alert and both
heater and stirrer are immobilised.
The clever clamping method eliminates the risk of the unit being inadvertently dropped into water.
The circulator can be easily carried around using the sturdy trade mark ‘orange handle’.

TEMPRATURE STABILITY0.05 oC
TEMPREATURE RANGE5 TO 95 oC
POWER1.25 KW
×

This site uses cookies to distinguish visitors. To accept the use of cookies, please select
Cookies policy